Chimney DIY’s

Chimneys in our houses are one of those items which are left neglected and forgotten and not taken care of cleanliness usually which is highly hazardous and can result in disastrous incidents.  So the importance of cleaning the chimneys is critically vital for the safety of our houses. If your chimneys are used on a regular basis, their cleaning and maintenance become even more important. As the time goes by and usage of chimney continues, the inner lining of chimney starts depositing a layer of soot and creosote. Theses layers are inflammable and may become a source of setting your house up on fire. These layers may build up to toxic gases such as carbon mono oxide which is dangerous for breathing.

It is advisable to get your chimney tested at least twice a month in case if you use your fireplaces on a regular basis. To clean and scrub off the chimneys from dust, ash and soot, many people hire professional chimney sweeps Seattle and pays them a lot of money. However, this article will describe the simple method adopting which you can clean the chimneys yourself.

This article lists the seven easy steps involved in chimney cleaning. Following the simple rules of chimney cleaning, we can avoid the need of chimney repair and masonry repair. Following these steps, you can say that you have done your chimney DIY (do it yourself).

Tools Required:

To follow these seven steps involved, you will need following items:

  • Ladder
  • Flashlight/torch
  • Goggles
  • Dust mask
  • Protective covering for furniture and floor e.g. tarp
  • Chimney brush

Step 1:

In the first step, examine your chimney and search for any wreckages present in it. For this purpose, use a very powerful torch or flashlight for viewing your chimney flue. You will get to find any debris in your chimney that might have collected. This might include paper, leaves, a bird’s nest, etc. Remove this in the first step.

Step 2:

It is advisable to close your fireplace or woodstove present in your house so that soot and ash from chimney do not damage your house. To avoid the mess, you should also use plenty of protective coverings for your furniture and house floor such as a tarp. It will prevent these materials to get damaged from the chimney materials.

Step 3:

This step will require the use of chimney brush to scrub off the inner lining of the chimney. For this purpose, get a stretchable rod that should be long enough so that it can reach the entire length of the chimney. You can connect several rods together to achieve the length for the whole chimney if you don’t have long enough rod. Chimney brush is fastened to rod carefully and is lowered in to the chimney.

Step 4:

Once you have lowered the rod down into the chimney along with the brush, you will need to raise it through the chimney. This process is supposed to be done slowly.

Step 5:

In this step, the practice of lowering and raising of the rod is continued until the inner layer of chimney gets scrubbed off of the dust and trash. Rod is lowered and raised several times in the chimney.

Step 6:

Now that you have practised the lowering and raising of the rod, you need to check the inside of the chimney. This is done with the help of flashlight capable of lighting the area well enough. This step is done to examine the chimney for any debris that might have been left.

Step 7:

Once you have undergone the above mentioned 6 steps, you need to dust and vacuum the surroundings of your fireplace. This is done to remove any soot, trash or residue left which might have got gathered during the process of cleaning the chimney.

 

 

No Replies to "Chimney DIY’s"

    Leave a reply

    Your email address will not be published.